JJ Roof Top Solar Water Heater save space on the ground, and its simple can compact design make it high efficient and reliable. JJ-I Series is a roof mounted, open circuit solar water heater designed to provide economic service.
JJ-I Series Family has 150L, 200L, and 300L solar hot water system.
Hurricane Resistant Mounting Frame is available.
Please don’t hesitate to fill in the Solar Water Heater Project Form and send back to us for a Solar Water Heating System Proposal.
JJ solar tank enamel coating is made from titanium blue enamel powder, and meet drinking water standard. Enamel Solubility reach Y class, and resist against 85℃ hot water. Longer Tank Life.
High efficiency absorber with its Sputtered Selective Surface maximizes the absorption of solar energy.
The system is equipped with a Cooling Tank to avoid over high temperature during periods of high solar radiation, and extend the system life.
JJ solar tank is equipped with stronge anode rod can perfectly protect the water heater tank against the corrosion, and ensure the even longer life of water heater.
JJ-I Series solar system’s vitreous enamel lined solar storage tank installed on the roof and directly connected to the solar collectors. In the Closed Circuit Series, sun heat is absorbed by the collector and passed to the heat transfer liquid inside the collector. As the temperature of the heat transfer liquid increases, the hot fluid rises up through the collector by the Natural Thermosiphon Principle, into the heat exchanger jacket around the water storage tank. The heat is transferred to the water, and cooling the heat transfer fluid at the same time. The cooler fluid flow down into the collectors and further hot fluid rising up into the heat exchanger jacket.
Incoloy800 Heating Element, CB, UL Approved
59T66T Thermostat UL, VDE Approved
P/T Relief Valve, CSA, ASME, ANSI, FHA Approved
Cooling Tank-Over High Temperature Protection Device
Solar Controller, CE Approved
Pressure Relief Valve
MODEL | JJ-I150-150L | JJ-I200-200L | JJ-I300-300L |
Storage Capacity | 150 Liters | 200 Liters | 300 Liters |
Boost Capacity(Electric) | 75 Liters | 100 Liters | 150 Liters |
Jacket Heat Transfer Area(㎡) | 1.2 | 1.7 | 2.5 |
Jacket Volume(L) | 8.6 | 12 | 18.6 |
Jacket Relief Pressure | 0.1Mpa | 0.1Mpa | 0.1Mpa |
Weight Empty | 70 KG | 80 KG | 120 KG |
Weight Full | 205 KG | 265 KG | 420 KG |
Working Pressure | 0.85Mpa | 0.85Mpa | 0.85Mpa |
MODEL | JJ-2000A |
Collector Dimension | 2000X1000X76mm |
Gross Area | 2m2 |
Net Aperture | 1.85m2 |
Header Tube Diameter(mm) | φ22 |
Riser Tube Diameter(mm) | 9 x φ8 |
Dry Weight | 35 KG |
Fluid Capacity | 1.30 Liter |
Max. Working Pressure | 0.85Mpa |
Absorber Coating | Blue Unite Sputtered Selective Surface |
Absorber/Riser Materialal | Aluminum |
Frame Material | Double Aluminium Alloy |
Insulation Material | 38 mm glass wool blanket |
Glass | 3.2 mm tempered low iron |
Performance Rating | 6.01kWh/day |
MODEL | JJ-I150-150L | JJ-I200-200L | JJ-I300-300L |
Power | 1.5kW, 2.0kW, 3.0kW | 1.5kW, 2.0kW, 3.0kW | 1.5kW, 2.0kW, 3.0kW |
MODEL | JJ-I150-150L | JJ-I200-200L | JJ-I300-300L |
Quantity | 1 Pieces | 1 or 2 Pieces | 2 or 3 pieces |